您好,欢迎访问无锡大地薄板有限公司!
139-6172-8888
0510-83207888
无锡大地薄板有限公司
您的位置:首页 > 新闻动态 > 时事新闻
联系我们

无锡大地薄板有限公司

地址:无锡钱桥镇钱胡路553号
电话:0510-83207888

咨询热线0510-83207888

厂家浅析离心风机整机清洗时的注意事项

发布时间:2018-12-23人气:129

离心风机的清洗是对其维护和保养相当重要的一项工作,那么离心风机整机清洗时的注意事项有哪些呢?这就是接下来我们要为大家讲解的相关问题了,请看下面的具体阐述吧:离心风机在环境中运转一段时间之后,各个缝隙中或零部件表面都会积存一层污垢,为了不影响离心风机的正常使用需要将风机的机壳和轴承箱拆卸下来进行彻底的清洗。

The cleaning of centrifugal fan is a very important work for its maintenance and maintenance. What are the precautions when cleaning the whole centrifugal fan? This is the next issue we will explain for you, please see the following specific elaboration: centrifugal fan in the environment for a period of time, each gap or parts surface will accumulate a layer of dirt, in order not to affect the normal use of centrifugal fan, the fan shell and bearing box need to be removed for thorough cleaning.

如果离心风机的这两部分不先拆的话,就不能完成对于整个风机的整体清洗;其次就是我们在清洗的过程之中需要特别注意到的就是,不可以对电动机直联传动到风机部分进行拆卸清洗,以防发生电动机烧损的机械故障。

If these two parts of the centrifugal fan are not disassembled first, the whole cleaning of the whole fan can not be completed; secondly, in the cleaning process, we need to pay special attention to the fact that the motor directly connected to the fan can not be disassembled and cleaned in order to prevent the mechanical failure of motor burning.

完成离心风机的整机清洗之后还要将零部件组装起来,首先使用成对斜垫铁垫平并将其置于基础上,其次不论是清洗还是组装离心风机时都先对其调节机构进行检测,查看其转动的灵活性。

After cleaning the whole centrifugal fan, it is necessary to assemble the parts. Firstly, a pair of oblique cushion iron pads are used and laid on the foundation. Secondly, whether cleaning or assembling the centrifugal fan, the adjusting mechanism is tested first to check the flexibility of its rotation.

由此可见,在拆卸和组装离心风机的时候应该先从那些要点想着手,我们注意了这些要点问题才能保证实际拆卸工作的准确性,同时降低完成清洗工作之后进行组装时发生问题的可能性,保证了用户可以正常进行使用风机,确保生产工作不受影响。

Therefore, when disassembling and assembling centrifugal fans, we should start with those key points. Only by paying attention to these key points can we ensure the accuracy of actual disassembly work, reduce the possibility of problems occurring in assembly after cleaning work, ensure that users can use the fans normally, and ensure that production work is not affected. 

辛苦整理!转载请注明来自 http://www.wxmlfj.com/faq/2086.html


推荐资讯

0510-83207888