3c离心风机对使用温度有什么要求呢？这就是本期离心风机厂家要为大家讲解的相关问题了，关于这个问题的答案是什么呢？请看下面的具体阐述吧：3c离心风机现在已经逐步得到了广泛的应用，它的超高性能和温度也有很大关系，我们一定要为它提供适当的温度，才能使其性能得到充分的展示。我们一般在使用时都要把温度控制在30度左右，但是由于工作时间的长短也是会影响温度变化的，所以我们特别注意的是当我们长时间的使用需要进行一个关闭，停下10分钟左右，这样才能保证性能的正常发挥。
What is the requirement of 3C centrifugal fan for operating temperature? This is the relevant question that the centrifugal fan manufacturer will explain to you in this issue. What is the answer to this question? See the following specific elaboration: 3C centrifugal fan has gradually been widely used, its ultra-high performance and temperature also have a great relationship, we must provide it with appropriate temperature, in order to make its performance fully demonstrated. We usually control the temperature in use at about 30 degrees, but because the length of working time will also affect the temperature change, so we pay special attention to the need for a long-term use of a shutdown, stop for about 10 minutes, so as to ensure the normal performance.
3c离心风机从空气的扩散机能与对四周环境的影响方面分析，以上排风为主的防雨帽，向上的排风出口风速均在5.0～8.0m/s，有利于排出的气体更好的进行扩散。使用时对温度的要求主要就是这些，我们一定要根据以上说明进行正确操作，从而提高我们的工作效益。
3C centrifugal fan from the diffusion function of air and the impact on the surrounding environment analysis, the above exhaust mainly rain cap, upward exhaust outlet wind speed are 5.0-8.0m/s, conducive to the better diffusion of exhaust gas. These are the main requirements for temperature in use. We must operate correctly according to the above instructions, so as to improve our work efficiency.
